haamon.blogg.se - Windows ce 6.0 gps navigator

WINDOWS CE 6.0 GPS NAVIGATOR INSTALL
WINDOWS CE 6.0 GPS NAVIGATOR SERIAL
WINDOWS CE 6.0 GPS NAVIGATOR UPDATE
WINDOWS CE 6.0 GPS NAVIGATOR PC

copy the file to on your WinCE/WinMobile device via ActiveSync or SynCE on Linux (or an option that may be faster because of the size of the maps, you can also directly copy the map to the (Micro-)SD card from your PC and re-insert the card in your mobile device later).

then click on download and save the file to country.bin (e.g.

for Germany) and click select for the chosen rectanglular map. Here is an example for Austrian German:ĭownload a Map from OpenStreetmap Language detection may not work on WinCE devices, so you may have to manually configure your language by manually setting it in navit.xml.

In navit.xml which comes with the WinCE Navit-build you can find:Īll files are included and no additional installation/configuration (and no espeak.exe) is necessary! Speech output should work out of the box on WinCE. To use the navigation_next_turn OSD item on WinCE, the icon must be explicitely sourced. On some device, it is necessary to use uppercase letters for the COM port (eg: "COM5") to get it work (added by Killerhippy, hope it helps) Once you know the GPS hardware COM port and baud rate, let's say port COM7 and baud rate 57600, then you have to set these values in navit.xml using a line similar to:

If the above does not help, for internal GPS receiver, have a look at registry\HKLM\Drivers\BuiltIn\GPSserial\FriendlyName to determine your GPS-COM-Port.

WINDOWS CE 6.0 GPS NAVIGATOR SERIAL

For a bluetooth-connected GPS, the virtual com port can be configured and / or reviewed in Bluetooth Settings on tab Serial port as value of input box Outbound COM port.You can also run the Windows CE utility SirfTech.exe on your device to scan the GPS, it will give you both the com port and baud rate for the GPS receiver.Tap Hardware and you can see the "GPS hardware port" and "Baud rate". (Sometimes this item is hidden, but you can run the program WMGpsShow to unhide it). On some devices, for internal GPS receiver, go to Settings > Connections > GPS.If you have an internal GPS or Bluetooth receiver, then you will have to determine the com port of the GPS. Note: you will probably have to comment out, or set to disabled all other entries to keep only this one.

Without it, you'll probably see lots of "vehicle_wince:initDevice:Waiting to connect to com" in the log file.

WINDOWS CE 6.0 GPS NAVIGATOR UPDATE

You have to set the COM-interface with the XML-tag in navit.xml.įor example for a bluetooth receiver connected via (virtual) com port com6 working at baudrate 38400, update you navit.xml files for GPS settings ( tag): GPS Receiver communicates with the Operating System OS via COM1, COM2. Edit the XML-file navit.xml using Notepad++ or another editor and store it back on your mobile device.

WINDOWS CE 6.0 GPS NAVIGATOR INSTALL

Download the cab file and install it.įor configuration with the navit.xml file it it useful to transfer the file navit.xml to your Desktop-Computer (ActiveSync on Win. If you mobile device with WinCE/WinMobile is directly connected to the internet. Navigate to the folder navit (probably located in \Storage Card.

Unpack the zip-file onto a navit folder to save on a SD card.

Start the cab-file for installation or (if applicable) use a CAB-Install application. Installation of Navit SD Card or MicroSD Card You may use the latest shipped XML file for you to configure (or for devices with low memory output use the file from ). From there get the CAB or ZIP navit package and put it on your device (see below). Make sure your device is compatible įirst, you will have to make sure that your device is compatible, that is to say, to make sure you can install arbitrary cab files or run arbitrary exe files on it.įor some devices, there are unlock procedures ( Mio C310 and C210) that will allow to escape from the main program and get a Windows CE desktop.ĭownload cab or zip Navit package ĭownload the latest release from and go to the WinCE section.

3.3.2 Using Navigation Next Turn OSD item.